Efika 5200B Project Scalabe mesh node in category Applications & Software proposed by Carlos Reinoso Espinoza on 28th April 2006 (accepted on 7th October 2006) [View Full Project]

Blog Entry

	Project goes on posted by Carlos Reinoso Espinoza on 18th September 2007 I have tested a pci bridge card to have two or three radios to avoid lost of bandwidth when adding nodes to the network but it still not working due to some irq problem so I'm using temporarily one 802.11g pci card. I have tested the Efika working in station, AP and ad-hoc mode. I have implemented a web configuration page. I am trying to do something similar to webif from openwrt project with Apache as the webserver. I am taking into account the possibility of power the Efika with PoE through an injector so the PSU must support input of 48V. The first power supply designed works ok and is capable of deliver 60W but is only accept input of 12V. It is not suitable for car environments or PoE. I am designing a new PSU based in recently measurements. I have measeured peaks of 1.5A in the 5V rail and 1A in the 3.3V so is really not necessary the expensive pico PSU.